Current
location:
+86 17853698681
Product Overview
The HM-FP650 from HM Instruments is an ultrasonic cell disruptor using liquid cavitation for sample preparation. It combines a separate generator and sound enclosure with adjustable ultrasonic output for cell disruption, dispersion, emulsification and extraction tasks.
Key Features
- Programmable pulse and total treatment times for repeat sample-preparation procedures.
- Adjustable power and stored programs allow settings to be matched to the sample and probe.
- Temperature probe and overload or overtemperature alarms support process monitoring.
Applications
Use for compatible cell suspensions and liquid-based laboratory samples requiring disruption, dispersion or emulsification. Match probe diameter, immersion depth and vessel geometry to the working volume. Control sample heating during treatment, especially for temperature-sensitive materials.
Technical Specifications
| Parameter | Specification |
|---|---|
| Ultrasonic power | 20–650 W |
| Nominal processing volume | 0.1–500 mL; suitable probe required |
| Frequency | 20–25 kHz |
| Control interface | 10.1-inch touchscreen |
| Pulse on time | 0.1–99.9 seconds |
| Pulse off time | 0–99.9 seconds; 0 for continuous output |
| Total time | 0.1–999.9 minutes |
| Stored programs | 256 |
Configuration and Selection
The overall processing range requires the appropriate probe; a standard 6 mm probe does not cover the full maximum volume and is specified for volumes up to 200 mL. Temperature-control equipment and PWM control are optional configurations.
Product Enquiries
Tell our sales representative your sample type, working volume and configuration requirements for product enquiries and coordination of service requests.
Sales Contact: Arthur
Email: Arthur@hmdzkj.cn
Tel / WhatsApp / WeChat: +86 18353666151
Address of this article:https://www.labinstruments.net/split-type-ultrasonic-cell-disruptor/hm-fp650-split-type-ultrasonic-cell-disruptor.html
